The Legion Body Fat Percentage Calculator helps you estimate the percentage of your total weight that’s body fat.

Enter your preferred unit of measurement (imperial or metric), gender, weight, and age. Then, choose the body fat formula you’d like to use (explained below). Take the required skinfold caliper or tape measurements, plug in the numbers, and the calculator will estimate your body fat percentage. 

This calculator also serves as an “ideal body fat percentage calculator.” It provides insights into how your current body fat percentage impacts your health. It also offers suggestions on increasing or reducing body fat to reach an “ideal” range for optimal well-being.

Body Fat Percentage Reference Points

The American Council on Exercise Body Fat Ranges



body fat calculator



Jackson & Pollock Ideal Body Fat Percentages


body fat percentage calculator

Find the Perfect Supplements for You in Just 60 Seconds

You don’t need supplements to build muscle, lose fat, and get healthy. But the right ones can help. Take this quiz to learn which ones are best for you.

Take the Quiz

Why Should I Control My Body Fat Percentage?

Your body fat percentage is a key indicator of overall health and wellness. 

Unlike body mass index (BMI), which doesn’t differentiate between muscle and fat, body fat percentage offers a clearer view of your body composition and, consequently, your health.

Having too much body fat, particularly subcutaneous fat, increases your risk of various health complications. For instance, carrying excess fat increases your risk for heart diseases like high blood pressure and atherosclerosis. 

Additionally, a high body fat percentage contributes to insulin resistance, a major cause of type 2 diabetes. Effectively managing your body fat can help prevent these health issues and guide you toward a healthier life.

Ways to Measure Body Fat

There are numerous ways to measure your body fat percentage. Let’s explore the most popular ones and discuss their accuracy.

Body Composition Scales & Handheld Devices

Body composition scales and handheld devices use bioelectrical impedance analysis (BIA) to measure body fat percentage.

They’re highly inaccurate because BIA passes a light electrical current through your body, which muscle conducts well (due to its high water content), and fat doesn’t. Theoretically, this should correlate electrical resistance with body fat levels, but there are major flaws.

First, electricity prefers the path of least resistance, bypassing fat for more conductive tissues, causing these devices to overlook substantial fat areas.

Second, BIA bases its predictions on equations that often yield imprecise results.

Lastly, factors like hydration, food intake, and recent exercise can significantly skew the readings, rendering BIA inconsistent and unreliable.

Pictures and The Mirror

Estimating a person’s body composition based on visual appearance is challenging due to differences in muscle mass among individuals with similar body fat percentages.

For example, an average 160-pound man with 10% body fat carries 16 pounds of fat. But a muscular 190-pound man with 10% body fat, has just 3 pounds more fat but a remarkable 27 pounds more lean mass, making him appear significantly different from the first man.

Dual-Energy X-Ray Absorptiometry (DXA)

Dual-energy X-ray absorptiometry, or DXA, uses a full-body X-ray to determine total fat and fat-free mass based on the varied X-ray energy absorption of different body tissues. Despite what many believe, DXA isn’t an infallible body fat measuring method.

Machines may yield varying results, even those from the same manufacturer. The algorithms translating raw data into body composition measurements differ, leading to inconsistencies. The kind of X-ray used can also impact the results.

Like BIA, even minor hydration level changes in lean mass can significantly skew DXA results, as can gender, body size, total fat mass, and disease state.

The Bod Pod

The Bod Pod measures the amount of air your body displaces inside a sealed chamber and uses equations to translate this into an analysis of body composition.

However, facial hair, moisture, body temperature, and the tightness of the clothing you wear inside the chamber can affect the Bod Pod’s results, which is why they can be off by 5-to-15%.

Find the Best Diet for You in Just 60 Seconds

How many calories should you eat? What about “macros?” What foods should you eat? Take our 60-second quiz to get science-based answers to these questions and more.

Take the Quiz

Magnetic Resonance Imaging (MRI)

MRI scanners use magnetic fields and radio waves to generate detailed 2D images of the body’s insides. Technicians scrutinize these images to estimate body fat percentage.

The precision of MRI largely depends on the number of images taken. Research shows that estimating body fat based on too few “slices” yields inaccurate results.

Hydrostatic Weighing

Hydrostatic weighing measures body density by comparing your weight on land to your weight underwater. The difference allows for an estimation of body fat percentage, as fat is less dense than water, and lean tissue is denser.

However, this method isn’t foolproof. Factors like ethnicity, body weight, and hydration status can skew results, causing potential inaccuracies of up to 6%.

Body Fat Calipers and Skinfold Testing

Calipers measure the thickness of your skin at specific body points during skinfold testing. These measurements feed into equations that estimate your body’s lean and fat mass. There are a few ways this can go wrong.

Grabbing too little or too much skin and fat will give falsely low or high readings. The equations that convert skin thickness into a body fat percentage can also generate inaccurate results, though this typically only affects individuals with low body fat levels (less than 15% or 25% for men and women, respectively).

Given the practicality and relative cheapness of body fat calipers, using skinfold measurements is one of the primary ways I recommend tracking your body composition. 

Here’s how to do it accurately:

1. Pinch your skin by placing the thumb and forefinger on your body about two inches apart (or further if there’s a lot of fat in this area), firmly pushing them into your flesh:


how to calculate body fat percentage

2. Push your fingers together, then gently pull the skinfold away from your body:


calculate body fat percentage

3. Measure a pinched skinfold by placing the tips of the caliper in the middle of the skinfold about an inch from your fingers. For example, the illustration below shows someone taking a suprailiac skinfold measurement: 


calculate body fat

4. Compress the caliper until it clicks (and no more), and note the measurement:


ideal body fat percentage calculator

When taking your measurements, bear the following in mind:

  • Take all measurements on the right side of your body, standing with your muscles relaxed.
  • Ensure your skin is dry and lotion-free.
  • Avoid taking measurements after anything physically demanding or when you’re hot, as this can temporarily increase the amount of fluid beneath your skin, inflating your skinfold thickness.
  • Take body fat caliper measurements at the same time of day each time.
  • If you’re a woman, avoid taking body fat caliper measurements during your menstrual cycle when you gain noticeable weight.

Finally, here are the various skinfold sites and how to measure them:

  • Abdominals: Pinch a vertical fold of skin one inch to the right of your belly button.
  • Biceps: Pinch the skin vertically halfway between the elbow and shoulder on the front of your arm.
  • Calf: Pinch the skin vertically on the inside of the largest part of the right calf.
  • Lower back: Pinch the skin horizontally about 6 inches above the waist and 2 inches to the right of the spine.
  • Midaxillary: Pinch the skin vertically below the armpit at the same height as the base of your breastbone.
  • Pectoral: For men, pinch a diagonal skinfold halfway between the front edge of your armpit and your right nipple. For women, pinch a diagonal skinfold about two-thirds of the way from your right nipple to the front edge of your right armpit (i.e., closer to your armpit than your nipple).
  • Subscapular: Pinch the skin diagonally an inch beneath the middle of your shoulder blade (about three inches to the right of your spine and six inches above your waist).
  • Suprailiac: Pinch the skin diagonally above the bony protrusion on the front of the right hip (the iliac crest).
  • Thigh: Pinch the skin vertically, halfway between the top of the kneecap and the top of the front of your thigh. 
  • Triceps: Pinch the skin vertically halfway between the elbow and shoulder on the back of your arm.

Some Nutritionists Charge Hundreds of Dollars for This Diet “Hack” . . .

. . . and it’s yours for free. Take our 60-second quiz and learn exactly how many calories you should eat, what your “macros” should be, what foods are best for you, and more.

Take the Quiz

Measuring Tape

Your waist circumference (measured at the belly button) is a reliable indicator of fatness: if your waist is shrinking over time, you’re losing fat, and if it’s growing, you’re gaining fat.

The Navy tape measure method is another technique you can use with a measuring tape. This method estimates body fat percentage based on neck and waist circumference for men and neck, waist, and hip circumference for women.

This method is simple, fast, and trustworthy. However, it’s not without limitations. It tends to overestimate body fat in lean individuals, specifically in men below 15% body fat and women below 25%.

Here’s how to do the Navy tape measure method:

  • For men, measure the circumference of the waist horizontally around the navel. For women, measure at the narrowest point of the waist. The individual should maintain a natural posture without sucking in their stomach.
  • Wrap the tape measure around the relaxed neck with the tape angled slightly downward in front.
  • For women, measure the hip circumference at its widest point.

Return to the body fat calculator above and change the “Body fat formula” to the “Navy tape measure method. Then, input your measurements. 

+ Scientific References